2 013年3月1日起,歐盟舊版的鎳釋放標準EN 1811:1998+A1:2008被新版標準EN 1811:2011替代。
儀器定義:
鎳釋放量測試儀,也稱旋轉磨損儀,是一種專門用來打磨金屬制品表面的涂層鍍層,以達到2年的使用磨損程度的一種輔助儀器。
儀器用途:
該儀器的主要用途是應對歐盟*新的鎳釋出標準中的鎳釋放量的輔助檢測。
測試方法:
模擬金屬制品與人體皮質接觸兩年的磨損狀態,經人工汗液在一定條件下浸泡7天后,配合原子吸收光譜儀定量分析浸泡液中鎳的含量,限量為0.5微克/平方厘米/每周。
適用標準:
EN12472:2005,EN 1811:2011,GB/T28485-2012,ISO24348-2007。
測試范圍: 所有飾物,眼鏡,手表等金屬產品……
儀器優勢:
**:觸摸屏顯示屏,操作簡單,顯示清晰,極大方便使用者的日常操作!
**:
1:全自動程序控制,能于特定時間轉向;
2:當測試完畢,儀器會自動停止。
第三:
清晰LED顯示屏顯示已運作及剩余時間,讓用家更好地分配工作。
第四:**設計
1:儀器設有保護門及透明觀察窗,配合電源及斷電保護設計,確保使用**。
2:配備“暫?!辨I,讓用家能在任何情況下暫時停止儀器運作。
鎳釋放測試儀專門為EN12472:2005測定涂層覆蓋材料鎳釋放的模擬穿著磨損和腐蝕試驗方法標準及ISO 12870:2004眼科光學-眼鏡框-要求和測試方法所設計,各項規格均滿足上述兩項標準要求。
【技術指標】:
1、控制器:**觸摸控制。
2、旋轉速度:30±2轉/分 。
3、承載能力:高性能電機,*大承載能力為10kg,提供穩定轉速 。
4、時間設定:可自行設定正轉和反轉時間 。
5、提醒:任務完成定時提醒功能 。
6、尺寸: 寬:72.0 cm (W) 厚:38.0 cm (D) 高:40.0 cm (H) 。
7、重量: 20 kg 。
8、附件:雙層固定支架樣品掛具掛架塑料扎帶硅橡膠內墊 。
9、標配:磨料(10kg) 研磨膠(1kg)標準片 1片 。
10、電源:AC220V。
Since March 1, 2013, the EU's old version of the nickel release standard, EN 1811:1998+A1:2008, has been replaced by the new standard EN 1811:2011.
Instrument definition:
Nickel release tester, also known as rotary wear tester, is a kind of special coating used to polish the surface of metal products. It can be used as an auxiliary instrument for 2 years.
Instrument use:
The primary use of this instrument is to assist in the detection of the amount of nickel released in the EU's latest nickel release standard.
Test method:
Wear simulation of metal products in contact with the human cortex of two years, the artificial sweat under certain conditions for 7 days, with the analysis of the content in the solution of nickel atomic absorption spectrometry quantitative limit of 0.5 mg / cm2 / week.
Applicable standard:
EN12472:2005, EN, 1811:2011, GB/T28485-2012, ISO24348-2007.
Testing range: all accessories, glasses, watches and other metal products......
Instrument advantage:
First: touch screen display, simple operation, clear display, greatly facilitate the day-to-day operation of the user!
Second:
1: automatic program control, can turn at a certain time;
2: when the test is finished, the instrument will stop automatically.
Third:
The clear LED display shows the operation and remaining time, allowing the user to better distribute the work.
Fourth: safety design
1: instrument with protective door and transparent observation window, with power supply and power failure protection design, to ensure the safe use.
2: equipped with the "pause" button, so that the user can in any case temporarily stop the instrument operation.
For the EN12472:2005 determination of nickel release coating covering material of nickel release tester in simulation wear and corrosion test method standard and ISO 12870:2004 ophthalmic optics - spectacle frame - Requirements and test methods for the design specifications meet the requirements of the two standards.
[technical indicators]:
1: Controller: advanced touch control.
2, rotating speed: 30 + 2 revolutions / min..
3, carrying capacity: high performance motor, the maximum carrying capacity of 10kg, providing stable speed.
4, time setting: you can set the forward and reverse timing.
5: reminder: task completion, timing reminder function.
6, size: width: 72 cm (W) thickness: 38 cm (D) high: 40 cm (H).
7, weight: 20 kg.
8, annex: double fixation rack rack sample plastic ribbon silicon rubber pad.
9, other configuration: abrasive (10kg), grinding adhesive (1kg) standard film 1 pieces.
10, power: AC220V.